The Bell XP-59A "Airacomet"

 

Wingspan	14.93 m (49 ft.)
Length	11.83 m (38 ft. 10 in.)
Height	3.76 m ( 12 ft. 3 3/4 in.)
Weight	3,320 kg (7,320 lb.) empty

This aircraft, the first Bell XP-59A, is the direct ancestor of all American jet aircraft. Built for testing purposes, it proved that turbojet-powered flight was feasible and efficient.

Designed and built by the Bell Aircraft Corporation, the XP-59A was first flown at Muroc Dry Lake, California, on October 1, 1942, by Bell's chief test pilot Robert M. Stanley. The next day Col. Laurence C. Craigie became the first U.S. military pilot to fly a turbojet aircraft. In October 1943, Ann Baumgartener Carl of the Women Airforce Service Pilots flew a YP-59A and became the first American woman to fly a jet airplane.

The XP-59A was powered by the first American jet engine, the General Electric I-A, which was based on the W2B design of British jet pioneer Frank Whittle.

                  Donated by the U.S. Army Air Forces and  Bell Aircraft Corporation

 

Design Features:
Wingspan:	14.9 m (49 ft)
Length:	12 m (38 ft 10 in)
Height:	3.8 m (12 ft 4 in)
Weight, empty:	3,294 kg (7,320 lb)
Engines:	2 General Electric I-A centrifugal-flow turbojet engines each rated at 5,560 newtons (1,250 lb) static thrust
Manufacturer:	Bell Aircraft Corporation, Buffalo, New York

 

 

 

 

 

 

 

 

 

 

The Bell XP-59A Airacomet

 

Click on Picture to enlarge

One of the later prototypes with nose canons in flight.

Bell P-59B Airacomet 3/4 front view of Reluctant Robot

Bell YP-59A in flight. X and Y aircraft had rounded vertical stabilizers and wingtips while the production A and B models had squared surfaces. The YP-59A can be distinguished from the XP-59A because Ys had nose armament

The 2nd Airacomet - note change of fin.

The first XP-59A during a test flight.

XP-59A on lake bed.

XP-59A # 3 which was later delivered to the RAF.

Prototype with dummy propeller to hide the  plane's real purpose.

Bell XP-59A being towed at Muroc Dry Lake, Calif. Note the false wooden propeller designed to conceal the jet engines during ground towing

Click on Picture to enlarge

Milestone: America's First Turbojet Aircraft

Date of Milestone: October 1, 1942/October 2, 1942

Aircraft: Bell XP-59A

Pilot: Robert M. Stanley/Col. Laurence C. Craigie

Aircraft Location: Smithsonian Institution, National Air and Space Museum, Milestones of Flight Gallery

Click on Picture to enlarge

Bell P-59B Airacomet in flight.

Bell P-59 Airacomet.

P-59A (S/N 44-22609, first production -A model) and P-63 (S/N 42-69417) in flight.

Rare color photo of the Airacomet

The XP-59A is the first American jet aircraft. It did not see combat but it did give the U. S. Army Air Forces (AAF) and the U. S. Navy valuable experience with jet aircraft technology and helped pave the way to more advanced designs. The United States was slow to enter the field of jet propulsion. Political and military leaders wisely chose to forego rushing jet airplanes into service and concentrated instead on mass-producing and fielding more conventional designs that could contribute more quickly to the war effort. Britain's Gloster Meteor fighter served briefly at war's end and the Japanese flew the Nakajima Kikka twice. The Germans lead the world in jet-propelled airplanes and the Messerschmitt Me 262 jet fighter and the Arado Ar 234 jet bomber both reached operational status. Other types also flew but the technology was so new that it had no measurable effect on the war.

By the mid-1930s, U. S. propulsion engineers were seriously considering the possible applications of jet turbine engines to the airplane. War accelerated efforts to design and fly jet aircraft. On February 25, 1941, General Henry H. "Hap" Arnold, Deputy Chief of Staff for Air (later commanding general of the AAF), wrote to Dr. Vannevar Bush, chairman of the National Advisory Committee for Aeronautics (NACA), asking him to form a special group to consider jet aircraft propulsion. Bush complied the following month and the "Special Committee on Jet Propulsion" included representatives from the Army Air Corps, Navy Bureau of Aeronautics, National Bureau of Standards, Johns Hopkins University, Massachusetts Institute of Technology, and the three U. S. manufacturers of various industrial turbines and turbo-superchargers for reciprocating aircraft engines, Allis Chalmers, Westinghouse, and General Electric.

In April 1941, Arnold was briefed on the Gloster E.28/39 jet-propelled test airplane and he watched the airplane fly in England. A W.1X turbojet engine designed by Frank Whittle powered the E.28/39. Arnold returned to the U. S. in May and briefed members of the AAF Engineering Division at Wright Field, Ohio, and the U. S. State Department. Efforts began to exchange information on this technology and on July 22, 1941, British and American officials met to discuss it. On September 4, officials of the U. S. government, the Army Air Forces, and the General Electric company met and decided that the United States must begin at once to construct 15 jet turbine aircraft engines (copies of a new Whittle engine, the W.2B) and three jet airplanes. The Whittle engine was not overly powerful so the group chose a twin-engine configuration for the new jet. General Electric was selected to build the engines because the firm was already familiar with the Gloster aircraft and the Whittle engine. Several factors influenced the group's decision to select the Bell Aircraft Corporation to build the new fighter.

At that time, Bell was not as busy developing and producing aircraft as other manufacturers. Their location near the General Electric plant was thought a boon to the vital exchange of information between airframe and engine developers. The group also considered Larry Bell's enthusiasm and reputation for making unorthodox designs fly. On September 5, Arnold informed Bell that his company would undertake the new project. A contract was awarded on September 30. AAF leaders and Bell officials chose the designation XP-59A as a good cover for the true nature of this work because the designation originally referred to a piston engine fighter project proposed earlier by Bell. General Electric used a similar ruse. At that time, the company built aircraft engine superchargers with model designations 'A' through 'F.' 'I' seemed to fit this pattern. 'A' signified the first of a series so General Electric and the AAF designated the first American jet airplane engine the Type I-A.

During September 1941, Larry Bell and his Chief Engineer, Harland M. Poyer, assembled a team and began to design the first American jet airplane. The team was guided only by theory. General Electric would not finish and begin testing the first engine until March 1942 so Bell could only guess at the performance characteristics. In fact, neither the W.1X engine shipped from England in October 1941 nor General Electric's own versions could generate the power levels initially predicted. Extreme secrecy and great urgency also hampered the project. For security reasons and to get the airplane flying as quickly as possible, General Arnold had at first forbidden use of wind tunnels to test and optimize the design. Later he relented but only allowed the group to use the low-speed tunnel at Wright Field, Ohio.

On September 19, Bell shipped the first XP-59A to a remote base in California, Muroc Dry Lake, for the initial flight trials. To maintain secrecy, Bell mounted a dummy propeller on the nose and threw a tarpaulin over the fuselage to disguise the Airacomet as just another new piston engine aircraft. Mechanics removed the "propeller" before flight and reinstalled it after the airplane landed. On October 1, 1942, Bell test pilot Robert M. Stanley took the XP-59A into the air for the first time. During this initial flight, Stanley kept the landing gear fully extended and flew no higher than 7.6 m (25 ft). Later that day, he made three more flights and reached heights of 30 m (100 ft). The flight envelope expanded further the next day after four more flights at altitudes as high as 3,048 m (10,000 ft).

Two General Electric Type I-A centrifugal-flow jet engines drove the unrefined XP-59A airframe to a maximum speed of only 628 kph (390 mph). A number of enemy and Allied piston engine fighters exceeded this velocity so in March 1942, the Bell Company received a follow-on contract for 13 YP-59A test and evaluation aircraft. More powerful General Electric I-16 (J31) turbojet engines powered these and all subsequent production Airacomets. The first of 13 YP-59As arrived for flight-testing at Muroc in June 1943. One of these aircraft set a new unofficial altitude record of 14,512 m (47,600 ft). Although Bell proposed that the Army Air Forces should acquire 300 P-59 production fighter aircraft, the Army decided to order only 100. Despite the altitude record, the P-59 was clearly outclassed by contemporary piston engine fighters such as the North American P-51 Mustang, Republic P-47 Thunderbolt, and Lockheed P-38 Lightning (see NASM collection for these aircraft).

Eventually, Bell completed only 50 production Airacomets-20 P-59As and 30 P-59Bs. Each was armed with one 37-mm M-4 cannon and 44 rounds of ammunition, and three .50 cal. machine guns and 200 rounds per gun. The P-59Bs were assigned to the 412th Fighter Group to familiarize AAF pilots with the handling and performance characteristics of jet aircraft. The P-59 aircraft could fly at a maximum speed of 658 kph (409 mph) at 10,640 m (35,000 ft).

America's first XP-59A, AAF serial number 42-108784, is preserved at the National Air and Space Museum. Shortly the jet's first flight, the Army recognized the need to have an observer on board to record flight test data. They converted the gun bays forward of the pilot to accommodate the observer, cutting a 20-inch hole in the upper skin and mounting a seat, small windscreen, and instrument panel in this rather cramped, open cavity! Flight tests resumed on October 30, 1942, and for the remainder of its AAF career, the aircraft flew in that configuration.

In February 1944, an AAF engineer assigned to the Airacomet project originated the idea of saving America's first jet aircraft for museum display. In August, the Army notified Bell that they planned to store the airframe at Muroc and the original engines at Wright Field, Ohio, until they could determine final disposition. The airplane had amassed only 59 hours and 55 minutes of flying time. On April 18, 1945, the Smithsonian asked for the aircraft. Before opening the new National Air and Space Museum in 1976, the staff restored the plane to its original configuration and removed the observer's open cockpit. Befitting its history, the first Airacomet now hangs in the Milestones of Flight gallery.

National Air and Space Museum